Certificate III in Engineering - Fabrication Trade

National ID: MEM30305
State ID: W238
Qualification level:

Course is available at the following locations

Private
NAM Training

This qualification covers the skills and knowledge required for employment as an Engineering Tradesperson – Fabrication within the metal, engineering, manufacturing and associated industries or other industries where Engineering Tradespersons – Fabrication work. The qualification has been specifically developed to meet the needs of apprentices in the above trade.

Trade specialisation Units of Competency that we offer suit surface finishers including electroplaters, galvanisers, powder coaters and industrial painter/blasters.

The qualification packaging has been developed on an assumption that competency will be developed through an integrated combination of on and off-the-job learning strategies such as those delivered through a formal apprenticeship.

We provide training and assessment in the apprentice’s workplace.

The qualification may also be achieved through formal skills recognition assessment processes such as Recognition of Prior Learning (RPL).  Under an apprenticeship, RPL may be provided for some of the qualification where appropriate, with training and assessment provided for the remainder.

Apprentices may take 6-48 months (according to apprenticeship requirements) to complete the curriculum. The enrolment term will depend on the current skills and knowledge of the apprentice and is negotiated with the apprentice and the employer.

Training is delivered on-site fully on-the-job

Course description

This qualification covers the skills and knowledge required for employment as an Engineering Tradesperson – Fabrication within the metal, engineering, manufacturing and associated industries or other industries where Engineering Tradespersons – Fabrication work. The qualification has been specifically developed to meet the needs of apprentices in the above trade.

Trade specialisation Units of Competency that we offer suit surface finishers including electroplaters, galvanisers, powder coaters and industrial painter/blasters.

The qualification packaging has been developed on an assumption that competency will be developed through an integrated combination of on and off-the-job learning strategies such as those delivered through a formal apprenticeship.

We provide training and assessment in the apprentice’s workplace.

The qualification may also be achieved through formal skills recognition assessment processes such as Recognition of Prior Learning (RPL).  Under an apprenticeship, RPL may be provided for some of the qualification where appropriate, with training and assessment provided for the remainder.

Apprentices may take 6-48 months (according to apprenticeship requirements) to complete the curriculum. The enrolment term will depend on the current skills and knowledge of the apprentice and is negotiated with the apprentice and the employer.

Training is delivered on-site fully on-the-job

Campus locations

Course page link
Private
The Apprentice and Traineeship Co

This course is for people employed as apprentice in metal fabrication tradespersons (traditionally known as boilermaker or heavy welder) in the manufacturing, engineering and related industry areas. You will gain the competencies required to work as a tradesperson in these areas.

You will acquire skills and knowledge in workplace communication, occupational health and safety, quality procedures systems and planning, engineering measurement, computations and computer technology plus industry-specific skills in metal fabrication that are relevant to your current or intended employment.

Delivery location: 9 Craigie Street Bunbury WA 6230

The course duration will vary depending on the training pathway agreed to between you, your employer and our RTO.

Course description

This course is for people employed as apprentice in metal fabrication tradespersons (traditionally known as boilermaker or heavy welder) in the manufacturing, engineering and related industry areas. You will gain the competencies required to work as a tradesperson in these areas.

You will acquire skills and knowledge in workplace communication, occupational health and safety, quality procedures systems and planning, engineering measurement, computations and computer technology plus industry-specific skills in metal fabrication that are relevant to your current or intended employment.

Delivery location: 9 Craigie Street Bunbury WA 6230

The course duration will vary depending on the training pathway agreed to between you, your employer and our RTO.

Campus locations

Course page link
Public
Central Regional TAFE
Course Details
Training Package Version : Release 4

The Certificate III in Engineering - Fabrication Trade specifies the competencies required for employment as an Engineering Tradesperson - Fabrication including metal fabrication, forging, founding, structural steel erection, electroplating, metal spinning, metal polishing, sheet metal work, welding and the use of related computer controlled equipment. This qualification covers the skills and knowledge required for employment as an Engineering Tradesperson - Fabrication within the metal, engineering, manufacturing and associated industries or other industries where Engineering Tradespersons - Fabrication work. The qualification has been specifically developed to meet the needs of apprentices in the above trade. The qualification packaging has been developed on an assumption that competency will be developed through an integrated combination of on and off-the-job learning strategies such as those delivered through a formal apprenticeship. The qualification may also be achieved through formal skills recognition assessment processes.

You will gain skills in:

  • Metal fabrication
  • Forging and founding
  • Structural steel erection
  • Electroplating
  • Metal spinning
  • Metal polishing
  • Sheet metal work
  • Welding - Stick MIG, TIG and Oxy, and
  • Using related computer controlled equipment.
Engineering @Kalgoorlie : Our Kalgoorlie Campus offers this course in a series of Blocks. Find out more about the structure and requirements for study with our Pre Enrolment Information booklet.
VET Student Loans : This course is NOT eligible for a VET Student Loan.
Additional Resources : Learners will be required to provide additional resources for this course. Details are provided in the Pre Enrolment Information.

Course description

Course Details
Training Package Version : Release 4

The Certificate III in Engineering - Fabrication Trade specifies the competencies required for employment as an Engineering Tradesperson - Fabrication including metal fabrication, forging, founding, structural steel erection, electroplating, metal spinning, metal polishing, sheet metal work, welding and the use of related computer controlled equipment. This qualification covers the skills and knowledge required for employment as an Engineering Tradesperson - Fabrication within the metal, engineering, manufacturing and associated industries or other industries where Engineering Tradespersons - Fabrication work. The qualification has been specifically developed to meet the needs of apprentices in the above trade. The qualification packaging has been developed on an assumption that competency will be developed through an integrated combination of on and off-the-job learning strategies such as those delivered through a formal apprenticeship. The qualification may also be achieved through formal skills recognition assessment processes.

You will gain skills in:

  • Metal fabrication
  • Forging and founding
  • Structural steel erection
  • Electroplating
  • Metal spinning
  • Metal polishing
  • Sheet metal work
  • Welding - Stick MIG, TIG and Oxy, and
  • Using related computer controlled equipment.
Engineering @Kalgoorlie : Our Kalgoorlie Campus offers this course in a series of Blocks. Find out more about the structure and requirements for study with our Pre Enrolment Information booklet.
VET Student Loans : This course is NOT eligible for a VET Student Loan.
Additional Resources : Learners will be required to provide additional resources for this course. Details are provided in the Pre Enrolment Information.

Campus locations

Course page link
Industry Training and Workplace Services Pty Ltd

Course description

Campus locations

Course page link
Public
North Regional TAFE

This qualification provides you with the skills and knowledge to work in the engineering fabrication industry. You usually have to complete an apprenticeship in fabrication trade, which involves both on and off the job training. The off-the-job training is provided through Registered Training Organisations. To enter you need to be employed. For more details on apprenticeships call the New Apprenticeships Referral Line on 1800 639 629 (FREECALL).

Course description

This qualification provides you with the skills and knowledge to work in the engineering fabrication industry. You usually have to complete an apprenticeship in fabrication trade, which involves both on and off the job training. The off-the-job training is provided through Registered Training Organisations. To enter you need to be employed. For more details on apprenticeships call the New Apprenticeships Referral Line on 1800 639 629 (FREECALL).

Campus locations

Course page link
Public
South Metropolitan TAFE

The Certificate III in Engineering - Fabrication Trade is an apprenticeship: you must be employed in a training contract by an appropriate organisation to study. Please see the Apprenticeships section for more information.

Course description

The Certificate III in Engineering - Fabrication Trade is an apprenticeship: you must be employed in a training contract by an appropriate organisation to study. Please see the Apprenticeships section for more information.

Campus locations

Course page link