Certificate II in Construction Pathways

National ID: CPC20211
State ID: D383
Qualification level:

Course is available at the following locations

Private
Carey Training Pty Ltd

This qualification can provide an individual with a pathway to the primary trades in the construction industry.

Industry is forecasting significant growth in the Construction industry and this qualification can assist in employment within this area.

We can provide this qualification via a traineeship, allowing students to have support from their trainer, while being able to apply what they have learnt into their workplace tasks.

Delivery location: 312 Victoria Road, Malaga WA

Training can be delivered at the above address or in conjunction with the client and their  locations Metro & Regional

Course description

This qualification can provide an individual with a pathway to the primary trades in the construction industry.

Industry is forecasting significant growth in the Construction industry and this qualification can assist in employment within this area.

We can provide this qualification via a traineeship, allowing students to have support from their trainer, while being able to apply what they have learnt into their workplace tasks.

Delivery location: 312 Victoria Road, Malaga WA

Training can be delivered at the above address or in conjunction with the client and their  locations Metro & Regional

Campus locations

Course page link
Public
Central Regional TAFE
Course Details
Training Package Version : Version 3
This qualification provides a pathway to the primary trades in the construction industry with the exception of plumbing. Trade outcomes are predominantly achieved through an Australian Apprenticeship and this Certificate II allows for inclusion of skills suited for entry to off-site occupations, such as joinery and shopfitting as well as carpentry, bricklaying and other occupations in general construction. This qualification will provide you with the practical skills and knowledge to undertake a range of manual labouring tasks on building and construction sites.

This Certificate II is designed to introduce learners to the recognised trade callings in the construction industry and provide meaningful credit in a construction industry Australian Apprenticeship. The qualification has core unit of competency requirements that are required in most Certificate III qualifications. The elective options are structured to allow choice from areas of trade skills as an introduction to a range of occupations. The construction industry strongly affirms that training and assessment leading to recognition of skills must be undertaken in a real or very closely simulated workplace environment and this qualification requires all units of competency to be delivered in this context. Completion of the general induction training program specified by the National Code of Practice for Induction Training for Construction Work (ASCC 2007) is required before entering a construction work site. Achievement of unit CPCCOHS1001A covers this requirement.

This course will provide you with the practical skills and knowledge to undertake a range of manual labouring tasks on building and construction sites.

You will learn about: 

  • Safe work practices
  • Using equipment and tools
  • Effective communication
  • Reading plans
  • Taking measurements
  • Concrete surfaces
  • Preparing surfaces
  • Preparing for various construction stages, and
  • Organising your work.

Additional Resources:
On occasion there may be additional resources that learners are required to provide as part of their course. Specific details will be provided in your Pre-Enrolment Pack.

Work Placement:
A Work Placement must be undertaken as part of this course.
Certification & Licensing:
Completion of the general induction training program specified by the National Code of Practice for Induction Training for Construction Work (ASCC 2007) is required before entering a construction work site. Achievement of unit CPCCOHS1001A covers this requirement.

VET Student Loans: This course is NOT eligible for a VET Student Loan.

Course description

Course Details
Training Package Version : Version 3
This qualification provides a pathway to the primary trades in the construction industry with the exception of plumbing. Trade outcomes are predominantly achieved through an Australian Apprenticeship and this Certificate II allows for inclusion of skills suited for entry to off-site occupations, such as joinery and shopfitting as well as carpentry, bricklaying and other occupations in general construction. This qualification will provide you with the practical skills and knowledge to undertake a range of manual labouring tasks on building and construction sites.

This Certificate II is designed to introduce learners to the recognised trade callings in the construction industry and provide meaningful credit in a construction industry Australian Apprenticeship. The qualification has core unit of competency requirements that are required in most Certificate III qualifications. The elective options are structured to allow choice from areas of trade skills as an introduction to a range of occupations. The construction industry strongly affirms that training and assessment leading to recognition of skills must be undertaken in a real or very closely simulated workplace environment and this qualification requires all units of competency to be delivered in this context. Completion of the general induction training program specified by the National Code of Practice for Induction Training for Construction Work (ASCC 2007) is required before entering a construction work site. Achievement of unit CPCCOHS1001A covers this requirement.

This course will provide you with the practical skills and knowledge to undertake a range of manual labouring tasks on building and construction sites.

You will learn about: 

  • Safe work practices
  • Using equipment and tools
  • Effective communication
  • Reading plans
  • Taking measurements
  • Concrete surfaces
  • Preparing surfaces
  • Preparing for various construction stages, and
  • Organising your work.

Additional Resources:
On occasion there may be additional resources that learners are required to provide as part of their course. Specific details will be provided in your Pre-Enrolment Pack.

Work Placement:
A Work Placement must be undertaken as part of this course.
Certification & Licensing:
Completion of the general induction training program specified by the National Code of Practice for Induction Training for Construction Work (ASCC 2007) is required before entering a construction work site. Achievement of unit CPCCOHS1001A covers this requirement.

VET Student Loans: This course is NOT eligible for a VET Student Loan.

Campus locations

Course page link
Private
Djaringo Pty Ltd

Course description

Campus locations

Course page link
Private
Everthought Education Perth Pty Ltd

Course description

Campus locations

Course page link
Public
North Regional TAFE

This qualification will provide you with the practical skills and knowledge to undertake a range of manual labouring tasks on building and construction sites. You will learn about safe work practices, using equipment and tools and effective communication. You will also learn skills that will enable you to read plans, take measurements, concrete surfaces, prepare surfaces, prepare for various construction stages, and organise your work.

This course can be delivered on request, please contact North Regional TAFE on 1300 996 573 for more information.

Course description

This qualification will provide you with the practical skills and knowledge to undertake a range of manual labouring tasks on building and construction sites. You will learn about safe work practices, using equipment and tools and effective communication. You will also learn skills that will enable you to read plans, take measurements, concrete surfaces, prepare surfaces, prepare for various construction stages, and organise your work.

This course can be delivered on request, please contact North Regional TAFE on 1300 996 573 for more information.

Campus locations

Course page link
Private
The West Australian Group Training Scheme Inc

This qualification provides a pathway to the primary trades in the construction industry with the exception of plumbing. Trade outcomes can be achieved through a stand-alone course. This Certificate II allows for inclusion of skills suited for entry to off-site occupations, such as joinery and shop fitting as well as carpentry, bricklaying and other occupations in general construction.

This Certificate II is designed to introduce learners to the recognised trade callings in the construction industry and provide meaningful credit in a construction industry Australian Traineeship.

Priority Industry Training (PIT) funding is available to eligible applicants.

Delivery locations:

  • Cockburn – 2/15 Blakely Row
  • South Guildford – 24 Kalamunda Road
  • Wangara – 59 Windsor Road

Course description

This qualification provides a pathway to the primary trades in the construction industry with the exception of plumbing. Trade outcomes can be achieved through a stand-alone course. This Certificate II allows for inclusion of skills suited for entry to off-site occupations, such as joinery and shop fitting as well as carpentry, bricklaying and other occupations in general construction.

This Certificate II is designed to introduce learners to the recognised trade callings in the construction industry and provide meaningful credit in a construction industry Australian Traineeship.

Priority Industry Training (PIT) funding is available to eligible applicants.

Delivery locations:

  • Cockburn – 2/15 Blakely Row
  • South Guildford – 24 Kalamunda Road
  • Wangara – 59 Windsor Road

Campus locations

Course page link
Private
Trade Academy Western Australia

Certificate II in Construction Pathways is a qualification that can be utilised as an entry level pathway to employment in construction via a 12 month fulltime traineeship or 18 month school based traineeship whilst employed under a training contract. Additionally this course is delivered as a fulltime course for the duration of 8 weeks through the priority industry training (PIT) program.

This qualification provides 12 accredited units of competencies which learners will be train towards. Some of these units are Occupational Health and Safety, Reading and Interpreting Plans and Specifications, correct use of Construction Tools and Equipment, Concreting, and Measurements and Calculations. An ideal qualification for entry level learners in the construction industry.

Training delivered at Bayswater Campus, Perth WA.

As well as metropolitan learners, Trade Academy Western Australia encourages regional and rural learners to contact the Academy to discuss their training ambitions.

Course description

Certificate II in Construction Pathways is a qualification that can be utilised as an entry level pathway to employment in construction via a 12 month fulltime traineeship or 18 month school based traineeship whilst employed under a training contract. Additionally this course is delivered as a fulltime course for the duration of 8 weeks through the priority industry training (PIT) program.

This qualification provides 12 accredited units of competencies which learners will be train towards. Some of these units are Occupational Health and Safety, Reading and Interpreting Plans and Specifications, correct use of Construction Tools and Equipment, Concreting, and Measurements and Calculations. An ideal qualification for entry level learners in the construction industry.

Training delivered at Bayswater Campus, Perth WA.

As well as metropolitan learners, Trade Academy Western Australia encourages regional and rural learners to contact the Academy to discuss their training ambitions.

Campus locations

Course page link